USED ESP / maverick 901 custom [11]

A one-of-a-kind custom-ordered model of the ESP Maverick 901 is now in stock.
The serial number is not given, and the detailed spec sheet is not included, so some of the specifications are unknown, but the presence of the actual instrument makes it a very special custom-made model.
The top of the body is made of a beautiful quilt-like wood, and the head is finished with the same wood for a matching look. The combination of the bird's eye maple fingerboard and dish inlays, which can be visually confirmed, accentuates the uniqueness of this guitar.
The neck-through construction, 628mm (24.75") scale, and 24-fret specification are designed to enhance playability and sustain. The bridge is a Tune-O-Matic + stop tailpiece design for stable tuning and powerful sound.
Seymour Duncan Hot Rails pickups are mounted on the neck, and Seymour Duncan SH-4 JB pickups are mounted on the bridge. A coil tap switch is also provided for a wide variety of sound makeup. While the output is high enough for high-gain, it also produces a clear tone when tapped, making it practical for a wide range of musical styles.
Weighing approximately 3.3 kg, the Maverick 901 is easy to handle and comfortable both on stage and in the studio, and is one of the rare Maverick 901s with a fixed bridge and through-neck custom order, making it an attractive model for players and collectors alike.
There are scratches around the studs.
There are also some scratches and dents.
The neck is in good playing condition with no noticeable abnormalities.
Item rank: B+: Some scratches, but no problems in normal use.

Country of manufacture: Japan
Case: Original hard case
Weight: 3.3 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 44.4mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Genuine hard case

Weight
3.3kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
44.4mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment