USED Ibanez / RG520G Black [11]

This is one of the few gold hardware version of RG made by Fujigen in the 90's. This is one of the few gold hardware version made by Fujigen in the 90's.
This particular model was made in 1994 at the Fujigen factory in Japan. The neck stamp and neck pocket are marked RG520G. This is a variation of the RG520, which is generally known as the 1998 catalog model, but it is believed to be a different specification that was manufactured prior to that. This model is a testament to the abundance of derivative models that Ibanez was known for at the time.
In addition to the thin and slim Wizard neck, the AANJ allows smooth access to the high position. The double-locking tremolo keeps the guitar in stable tuning even under heavy arming.
Pickups are Ibanez V7/V8 with powerful and direct output.
The fearless look of the black body with gold parts is also a major attraction.
The bridge's 1st string lock insert and lock screw were missing, so substitutes have been installed.
Tone shaft damaged and has been replaced.
Tremolo spring section back panel missing. Rod cover missing. Arm is missing.
There are paint chips and cracks throughout the body. There is a black stain on the base of the head. Overall, there are many scratches and dents.
The neck has a reverse warp on the 6th string side and a slight forward warp and twist on the 1st string side. The frets have been fretted and there are no playability issues.
The inside of the case is torn. The zipper handle of the case's main compartment and front pocket is broken.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: F413523
Year of manufacture: 1994
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: * Arm missing
Weight: 3.36kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 16.4mm
Neck thickness near 12th fret: 20.5mm
SCALE: 648mm (25.5")
RADIUS: 432mm (17")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.