USED Burny / MG-145S Heart Yellow hide Model [11]

The MG-145S is a reproduction of the Hide model from Burny by Fernandes.
While the full spec model had a through neck, this one has a bolt-on joint.
The yellow heart was used by X JAPAN hide in the latter half of his career, and combined with his exciting looks, it became intensely recognizable and is still used as a representative design on merchandise today.
The sustainer, which is indispensable for hide's guitar performance, allows for semi-permanent long tones, and of course, in harmonics mode, a feedback effect is forced to occur, allowing for more authentic hide sound to be pursued.
Sustainer ON/OFF mini switch washer nut is missing.
Sustainer switches are bent.
There is a crack on the neck joint. There are several dents on the neck with paint cracks.
Overall, there are scratches, dings, metal rust, and signs of use.
The neck is slightly twisted and wavy, with a slightly larger forward bow on the 6th string side, and the low frets are inverted, although the overall bow is forward.
The frets have been fretted and there are no problems with normal use.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: Non-genuine soft case
Weight: 3.41kg
Truss Rod: Note: Rod has been checked up to 60 degrees to the left and right, no problems (twisting and rippling).
Fretboard: Still can withstand cutting, but the frets are low.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 22.3mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and alignment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.