USED System Craft / JB Type Natural [11]

Custom-made JB type bass by System Craft.
It has an ash body, maple neck, and maple fretboard, which is a royal wood material composition, and has a 70s style character with a good attack, tight low frequency, and clear high frequency. The minimalist look without the pickguard allows the sound of the wood to be felt directly.
The pickups are JB type without logo and bobbin-less. The tone has a wide range and is straightforward with few peculiarities, and even when the pickups are passive, the sound has a sufficient core. Pickup fence is installed.
The electrical section is equipped with a hand-assembled 2-band active preamplifier. It can boost/cut bass and treble, and can be switched to passive with a push/pull operation. When active, the sound is more aggressive and richer in range, and it is less likely to get buried in live performances or band ensembles.
The hardware is made of simple parts without engraving, which is a typical custom-made configuration that emphasizes sound and playing comfort rather than parts brands.
The center position mark is partially peeled off, and after the 15th fret, it is completely peeled off, leaving only a mark.
There are some scratches, dents, and metal tarnish, and the guitar is slightly used.
The low position side of the neck is inverted and high up, and there is some rippling. The frets have been fretted and are currently playable.
Item Rank: B+: Some scratches, but no problems in normal use.

Case: Non-authentic soft case
Weight: 4.50kg
Truss Rod: No problem, rod checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 39.0mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 22.7mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.