USED YAMAHA / SBV-J1 Jane Red [11]

SBV series "SBV-J1" developed based on YAMAHA SB series is now in stock!
Produced by Mr. Hajime Okano, a fan of the SBV series, this model is completely limited to 100 units with serial numbers!
This is serial number 030 and is the 30th numbered unit.
The body and neck are made of one rank higher material, and the red color (Jane Red) specially blended for this model is used.
Maple fingerboard with cellular binding and block inlays used on the Yamaha SB-800.
The pickups have the same looks as the previous SBV, but the front coil wires are made in the USA, giving it a wider range.
The tone has been eliminated, a tone cancel switch has been installed, the two volume has been changed to a PU selector, and the jack has been changed from the side of the body to on the pickguard, all original specifications.
This is one that was designed and developed with an unbelievable amount of time and love!
Overall, there are some minor scratches and dents, but it is in relatively clean condition considering its age.
There are scratches and dents on the back of the body. There is a signature on the back of the pickguard.
All pickguard screws have been replaced because they were deteriorated.
Metal parts have rust, tarnish, and other age-related deterioration.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 030/100 QJX239139
Year of manufacture: 2003
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.64kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.3mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 25.0mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret side burr correction

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.