USED Fender Japan / ST72 (CTM-50R) Vintage White [11]

Based on the ST72 style reminiscent of 1970s Stratocasters, this is an irregular model bearing the CST-50R designation.
While featuring ST72-style details such as a three-point neck joint and a large headstock, it is characterized by CST-50 stamps on both the neck and body, suggesting it was likely a custom order or limited-run production from that era. The grain visible through the neck pocket appears to be ash, and with a weight of approximately 3.48 kg, it offers a well-balanced, easy-to-handle feel.
It is equipped with DiMarzio pickups, featuring a highly practical configuration of DP110s in the front and rear positions and a DP175 in the center. While possessing a vintage-like character, the sound offers moderate output and excellent clarity.
The front tone pot has been replaced due to a malfunction.
A film has been applied to the pickguard, suggesting it has been replaced.
The back panel is missing. The 5th string tuner is mounted at a slight angle.
There is a crack at the neck joint. There is paint chipping on the side of the body.
Other than that, there are some minor scratches, dents, and tarnish on the metal, but there are no other noticeable flaws besides those mentioned above.
The neck is slightly arched on the 6th string side and straight on the 1st string side, with a slight twist. This does not affect playability.
Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: E731690
Year of Manufacture: 1984-1987
Country of Manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 3.48 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 20.3 mm
Neck thickness near the 12th fret: 22.4 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.