USED Cort / HBS-2 Burnt Open Pore [11]

The Cort Hiram Bullock Signature Model "HBS-2" is now in stock!
A signature model by fusion guitarist Hiram Bullock!
Features an ash body with a bird's-eye maple neck and fingerboard.
The powerful grain of the ash wood and the beautiful figure of the bird's-eye maple, combined with a matte finish, create a look that exudes luxury!
Features a unique double cutaway body and HSH pickup configuration.
In the mix position of the 5-way switch, the humbucker is automatically coil-tapped, allowing you to enjoy a single-coil-like half-tone.
The tremolo arm housing features a special design that uses spring tension to automatically return the arm to its set position.
Offering excellent playability and a wide range of sound variations, this guitar is perfect for fusion and a variety of other genres.
There are signs of wear, such as minor scratches and dents.
Signs of aging, such as rust and discoloration, are visible on the metal parts.
The bridge, saddles, string guides, wiring, and pickups have been replaced.
The back panel is missing.
The neck shows no noticeable abnormalities and is in good playing condition.

Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: 080208943
Country of Manufacture: Indonesia
Case: Non-original soft case
Weight: 3.38 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (slight twist and high action present)
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.1 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 21.7 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Modifications: Bridge, saddles, string guides, wiring, pickup replacement
Repair and maintenance performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, leveling, electrical repair, repair of multiple pickup screw holes, correction of loose bridge anchors, nut adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.