Skip to product information
1 of 16

USED Fender / Made in Japan Traditional 50s Telecaster White Blonde [11]

Serial Number : JD23028601

[SN JD23028601] USED Fender / Made in Japan Traditional 50s Telecaster White Blonde [11]

Item Code: 11-2800005412741
Condition: USED
Store: [11] umeda

Regular price ¥104,000 JPY
Regular price Sale price ¥104,000 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
Fender Made in Japan "Traditional" Series 50s Telecaster
The Made in Japan Traditional Series is the result of a fusion between Fender’s traditional instrument-making philosophy and Japan’s refined craftsmanship.
Features a gloss-finished basswood body, a “U”-shaped maple neck, and a maple fingerboard.
It features a classic style inspired by 1950s Telecasters, incorporating a three-saddle bridge and vintage-style pickups.
With its crisp attack and clear, resonant sound, this is a versatile instrument suitable for a wide range of genres.
It is in excellent condition, showing only minor signs of use such as slight scratches.
The neck shows no noticeable issues and is in excellent playing condition.

Condition Grade: A: Excellent

Serial Number: JD23028601
Year of Manufacture: 2023
Country of Manufacture: Japan
Case: Genuine soft case
Weight: 3.18 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 22.5 mm
Neck thickness near the 12th fret: 23.1 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in this matter.
Fender Made in Japan ”Traditional”シリーズ 50s テレキャスター
フェンダーの伝統的な楽器製作の美学と日本の洗練されたクラフトマンシップを融合することで導き出されたMade in Japan Traditionalシリーズ。
グロスフィニッシュのバスウッドボディ・”U” シェイプメイプルネック・メイプル指板の構成。
1950年代テレキャスターを意識したクラシカルなスタイルに、3サドルブリッジやヴィンテージスタイルピックアップを採用。
歯切れの良いアタック感と抜けの良いサウンドが魅力で、幅広いジャンルで活躍してくれる1本です。
細かな傷程度の使用感が綺麗な状態です。
ネックに目立った異常なく演奏コンディション良好です。

商品ランク: A:美品

シリアルナンバー: JD23028601
製造年: 2023
製造国: 日本
ケース: 純正ソフトケース
重量: 3.18kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 正常範囲内演奏可能なレベルでフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 41.6mm
ネック厚1フレット付近: 22.5mm
ネック厚12フレット付近: 23.1mm
スケール: 648mm (25.5")
RADIUS: 241mm (9.5")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4