USED SCHECTER / HELLRAISER C-1 FR Black Cherry [11]

An early model of the SCHECTER Diamond Series HELLRAISER C-1 FR.

Featuring a mahogany body paired with a quilted maple top, this C-1-shaped guitar boasts a three-piece mahogany neck and a rosewood fingerboard. Its distinctive appearance is highlighted by abalone binding and Gothic cross inlays.

It is equipped with a vinyl-wired EMG 85 pickup in the front and an EMG 81 in the rear. This setup delivers the tight, powerful sound characteristic of active pickups, making it a great match for high-gain playing styles. The bridge features a Floyd Rose system, allowing for whammy bar playing.

This is believed to be an early Hellraiser C-1 FR made in South Korea. Key features unique to this early model—which differs from current specifications—include the EMG 81/85 pickups and a simple control layout without coil tap functionality.
The front escutcheon was damaged, so it has been replaced with a Scud-brand one.
There is some plating wear on the Floyd Rose. There are multiple scratches on the back of the body.
In addition, there are scattered scratches and dents, giving the guitar a slightly used appearance.
There are no noticeable issues with the neck, and it is in good playing condition.
Condition Grade: B+: Has some scratches but is in good condition for normal use

Serial Number: 0636746
Country of Manufacture: South Korea
Case: Genuine soft case
Accessories: Arm
Weight: 3.78 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low-E String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 41.5 mm
Neck thickness near the 1st fret: 21.1 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 648mm (25.5")
RADIUS: 356 mm (14")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, front escutcheon replacement, front volume pot cleaning

* As this is a used item, please note that there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here.

* Any measurements listed for the truss rod, remaining fret height, string height, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item, and it is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.