USED YAMAHA / SG800S Metallic Blue [11]

The SG is one of YAMAHA's most iconic models.
Mahogany back, maple top body, mahogany neck, rosewood fingerboard. Set neck joint is adopted.
This model is equipped with a bi-sound system that can be switched to a single coil sound by pushing the tone pot, allowing for a wide range of sound creation.

There are some scratches and dings, but there are no noticeable marks.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 070952
Year of manufacture: 1982
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.11kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75")
RADIUS: 381mm (15")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
070952

Year of manufacture
1982

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.11kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
22.5mm

Scale
628mm (24.75")

RADIUS
381mm (15")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing