USED ORVILLE / LPC-75 1991 Ebony Black [12]

1991 Orville LPC-75 is now in stock!
This is a popular model that has now caused a price hike both in Japan and overseas.
As you can see, it does not have "by Gibson" on it, but is a Terada-manufactured LPC-75 with Japanese pickups and rosewood fretboard.
At the time of its release, this model was a model that set itself apart from other replica models, as users who could not afford to buy the original GIBSON were all snapping it up.
Nowadays, the term "Japan Vintage" is used to describe this model, and although it was made in the 1990s, it is a gem that represents the popularity of Japanese-made instruments in the market.

Due to a broken rear escutcheon and deterioration of the Tone pot, various parts have been replaced.
Overall, there are few scratches and it is quite clean for a guitar that is about 30 years old.
The neck is twisted and rippled, especially on the first string side, making it impossible to set the string height severely.
The neck is set at 2.0 to 2.5mm on the 12th fret, and there are no major problems for normal playing.

Serial number: K017923
Year of manufacture: 1991
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.43kg
Truss Rod: Note: Rod has been checked up to 60 degrees to the left and right, no problem (large torsion).
Fret Remaining: Note: Still can withstand cutting, but the frets are low.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.9mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 381mm (15")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

specs

Serial No.
K017923

Year of manufacture
1991

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.43kg

Truss Rod
No problem (large torsion)

Remaining frets
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.5mm above 12th fret

High string side
2.0mm above the 12th fret

Nut width
43.9mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
24.0mm

Scale
628mm (24.75")

RADIUS
381mm (15")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair