USED Fender / 1976 Jazz Bass Natural / Maple Fingerboard [12]

This 1976 Jazz Bass is in stock.
The heavy ash body and maple neck/fingerboard give it a punchy and punchy sound, and it does not lose its presence in a band ensemble.

The pegs have been replaced, and the pickguard (without date sticker), bridge, and control plate have probably been replaced as well.
All screws holding the pickguard and control plate have also been replaced.

The pots are all CST 1976 (1377613,13776xx,13776xx) from the date, and the pickups are judged to be original due to solder virginity, although there are not enough features to identify the age of the pickups.

There is no neck date, and the body stamp is illegible.
The lacquer paint on the body and the top of the head is discolored and discolored, and part of the paint on the body has melted and peeled off.
The paint is also darkened from the base of the head to the side of the head.
Although the guitar has a strong sense of use, it has been maintained and cleaned at our repair center, including refretting (fingerboard surface refinish) and re-nutting.
The truss rod has little leeway in the tightening direction, but there is no problem with the neck condition as it is now, and playability is good.
The original hard case is missing.
Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: 692782
Year of manufacture: 1976
Country of manufacture: USA
Case: Non-authentic soft case
Accessories: Original frets
Weight: 4.94kg
Truss Rod: Little room to tighten the rod, but no problem with the neck.
Fret Height: No problem, but there is enough fret height.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.8mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 24.7mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard correction, fret replacement, fingerboard painting, nut replacement

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
692782

Year of manufacture
1976

Country of manufacture
U.S.A.

Case
non-genuine soft case

Accessories
Original Fret

Weight
4.94kg

Truss Rod
There is little room to tighten the rod, but there is no problem with the neck at present.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.5mm above the 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.8mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
24.7mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard correction, fret replacement, fingerboard painting, nut replacement