USED Gibson Custom Shop / Les Paul Custom 2013 Alpine White [12]

A 2013 Nashville Custom Shop Les Paul Custom is now in stock.
With a maple top/mahogany back body and mahogany neck/rich-lite fingerboard wood specs, the jet-black rich-lite fingerboard is further highlighted by mother-of-pearl block inlays.
A Nashville Tune-O-Matic bridge is mounted, which is steadily grounded to the body via stud anchors to provide a wide range of octave pitch adjustment.
The pickups are high-power 490R/498T with a weight of 4.51kg, which produces a clear tone with little muddiness even when distorted hard, and even with clean tones, arpeggios and chord tones with a good sense of separation can be obtained, and even single notes have a strong presence.

There is paint burn on the neck grip at the 1st and 2nd frets, and there is a buckle scratch on the body back.
There are some minor scratches and dings scattered throughout, and some of the plating on the pickup covers has peeled off.
The pickup covers have been cleaned and maintained at our repair center, and the playability is good.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: CS301798
Year of manufacture: 2013
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate of Authenticity
Weight: 4.51kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.9mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs : .010-.046 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
CS301798

Year of manufacture
2013

Country of Manufacture
U.S.A.

Case
Genuine hard case

Accessories
Certificate of Authenticity

Weight
4.51kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.9mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment