USED Gibson USA / Explorer 76 2001 Ebony [12]

A representative model of Gibson's deformed guitars that still reigns in the lineup today.
Like the Flying V, this model reproduces the popular 1976 specifications of the Explorer, which, like the Flying V, is still a representative model of Gibson's deformed guitars in the lineup since its release in 1958.
The headstock has six pegs, which is rare for Gibson guitars, asymmetrical and radical body shape, but it is widely used by metal guitarists in the 80's because of its high playability at high frets and stable picking form thanks to the protruding 6-string side body wing.
Mahogany body, 22-fret mahogany neck and rosewood fingerboard, 496R/500T high-power pickups, Nashville Tune-O-Matic bridge, 2 volume/1 tone, 3-way toggle switch. The guitar is equipped with a 496R/500T high-power pickup, Nashville Tune-O-Matic bridge, 2 volume/1 tone, and 3-way toggle switch.

There are numerous sticker marks on the body back and a rice-sized paint chip on the lower 6th string side.
There are many scratches, dings, stains, and paint reactions scattered throughout the body, and the bridge and tailpiece are dull, and the pickguard screws are rusted.
There are paint chips on the tip and base of the head, and there are dents and paint tarnish from the 11th to 16th frets on the side of the neck on the 6th string side.
The neck and frets are in good condition, and the guitar has been maintained and cleaned at our repair center, so it has good playability.
The original hard case is included, but the dial lock is damaged.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 02201627
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case (dial lock broken)
Weight: 4.37kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 21.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
02201627

Year of manufacture
2001

Country of manufacture
United States of America

Case
Genuine hard case (broken dial lock)

Weight
4.37kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.5mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
21.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment