USED C.F.Martin / D-Custom Rosewood 2013 [12]

This is an all solid, USA-made model designed by a domestic distributor based on a model ordered by a major store in the USA.
The top bracing is non-scalloped, but the taper is quite deep, so you can expect the same effect as a scalloped brace. The top bracing is non-scalloped, but the taper is quite deep, so it is an A-frame type that can be expected to have the same effect as a scalloped brace. Only the top is wrapped with tortice type binding, and the back is non-binding, so you can see that it is solid from the cross section, which is a nice point in a way. The sound is very dry and easy to handle and play from the beginning, whereas a D-28, for example, will sound better and better as you play it harder and harder.

The condition of the guitar is as follows: there are scratches on the top of the head, some shiny spots on the back of the neck, some scratches on the buckle, some dents on the binding, and some other minor signs of use overall.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 1307249
Year of manufacture: 2013
Country of Manufacture: USA
Case: Non-authentic semi-hard case
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem
Fret Depth: No problem, fret height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.4mm
SCALE: 645mm (25.4")
RADIUS: 356mm (14")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string change, rod adjustment, string height adjustment, rubbing, nut adjustment

Specs: D'Addario EJ-16 / .012-.053 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
1307249

Year of manufacture
2013

Country of manufacture
U.S.A.

Case
Non-Genuine Semi-Hard Case

Truss Rod
No problem, rod is confirmed to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.4mm

Scale
645mm (25.4")

RADIUS
356mm (14")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string change, rod adjustment, string height adjustment, rubbing, nut adjustment