USED Paul Reed Smith (PRS) / McCarty Singlecut 594 Semihollow 10Top Faded Whale Blue [12]

A McCarty594 single-cut, semi-hollowbody barreled model that is the result of Paul Reed Smith's deep knowledge of vintage guitars and his research down to the smallest detail.
The scale is 24.594 inches, which is slightly shorter than the commonly recognized 24.75 inches, and this gives the guitar a unique tensioned sound and playing comfort.
The pegs are also equipped with the newly developed "Tweaked Phase III" pegs, which are specially designed to reduce the loss of string vibration in tuners.
The pegs are designed to minimize the loss of string vibration in the tuners and transmit the vibration to the body as much as possible.
The neck shape is the "Pattern Vintage" shape, which is a detailed reproduction of the neck shape of Ted McCarty's 1953 Les Paul.
Newly developed 58/15LT (Low Turn) pickups are installed.
The output is kept low to give a clear and warm tone with a pleasant, singing sound, and it is a vintage pickup in the PRS style, with a 58's humbucker in mind.
The position of the toggle switch is not near the control as seen on conventional PRS, but rather daringly placed on the horn on the 6th string side. The reason is that the length of the lead wire that runs through the body is also an important element of the vintage tone.
This is an excellent model that overturns the image of PRS, which is characterized by its high-fidelity sound.
This is a model that Les Paul fans should definitely try.

There are some dents scattered on the body back, and there are some fine scratches overall.
The nut has been replaced with a cow bone, and the metal parts are dull.
The strap pin has been replaced with a Schaller lock pin, and the strap side parts are included.
The strap pin has been replaced with a Schaller locking pin, and the strap side parts are included.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 18 253961
Year of manufacture: 2018
Country of manufacture: USA
Case: Original hard case
Accessories: wrench, lock pin
Weight: 3.6kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 22.4mm
Neck thickness near 12th fret: 25.2mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs : .010-.046 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
18 253961

Year of manufacture
2018

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Wrench, Lock pin

Weight
3.6kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
22.4mm

Neck thickness near 12th fret
25.2mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment