USED Fender Japan / ST72-110DSC Yellow White [12]

Inguy-style Strat with scalloped fretboard and DiMaggio HS-3 pickups.
It reproduces the specs of Ingvay's favorite Strat, which was the following year.
This model was a stepping stone to the Ingvay Malmsteen signature model, the ST72-140YM, released in 1994.
With a basswood body, maple neck with scalloped fingerboard, jumbo frets, and HS-3 pickups on the front and rear, it is ideal for playing neoclassical-type superb technique.

There is a noticeable line scratch on the head top and scattered dents around the periphery of the head top.
The body also has numerous scratches and dings scattered throughout, and there is a small paint crack on the neck joint.
The brass nut has been replaced, the string guide has been replaced on the treble string side, the back panel is missing, and the metal parts are dull.
The back panel is missing and metal parts are tarnished.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: P022626
Year of manufacture: 1993-1994
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.45kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.3mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, tension nut installation

specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
P022626

Year of manufacture
1993-1994

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
Arm

Weight
3.45kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.3mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
22.3mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, tension nut installation