USED Orville / Les Paul Standard / LPS-75 Vintage Sunburst [12]

Orville" Les Paul Standard, a Gibson-approved Japanese brand that was distributed in Japan from the late 1980s to the late 1990s, is now in stock.
This Les Paul Standard was manufactured by Fujigen in 1994, according to the serial number.
The body is made of maple top and mahogany back, and the mahogany neck and rosewood fingerboard are set neck jointed.
The pickups are Orville originals made in Japan, and the exquisite construction combined with the Japanese manufacturing process makes this a superb sounding instrument.

There are some dents and peeling paint on the tip and root of the head.
There is little damage on the top of the body, but there are many scratches and dents scattered on the neck grip and body back, and there is a large peel of paint on the body end.
Please note that the dents on the neck grip can be felt against the thumb when playing and may be uncomfortable for some players.
The body has been cleaned and maintained at our repair center, and the playability is good.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 402007
Year of manufacture: 1994
Country of manufacture: Japan
Case: Original soft case
Weight: 4.26kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 25.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs, etc.)

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
402007

Year of manufacture
1994

Country of manufacture
Japan

Case
Genuine soft case

Weight
4.26kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.7mm

Neck thickness near 12th fret
25.6mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment