USED dragonfly / Sottile Custom 666 Half Matte Natural [12]

Dragonfly's Sottile Cusotm 666 is now in stock in used condition!
The "Custom" model by dragonfly is a model with exotic wood ply top.
The "Custom" model is a model with an exotic wood ply top, a ziricote top/mahogany back body, a maple neck, and a Perferro fingerboard.
Dragonfly dares to use high quality and hard Perferro for the fingerboard, aiming for a brighter sound than Rosewood.
The characteristic 666mm scale can be used up to low B even with standard string gauges. It is possible to pursue a heavy sound without discomfort.
The tone knob is a high-low pass filter, allowing control of low frequencies in addition to the normal tone control. It is possible to optimize the sound makeup to match the band's sound.

Overall, there are some minor scratches and dings scattered throughout the instrument. There are buckle scratches on the body back and several dings scattered around the outer circumference of the body top.
Although it has some signs of use, it has been maintained and cleaned at our repair center and is in good playability condition.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: X18038S
Year of manufacture: 2018
Country of manufacture: Japan
Case: Original gig bag
Weight: 2.90kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.0mm
SCALE: 666mm (26.2")
RADIUS: 400mm (15.7")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
X18038S

Year of manufacture
2018

Country of Manufacture
Japan

Case
Genuine gig bag

Weight
2.90kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.0mm

Scale
666mm (26.2")

RADIUS
400mm (15.7")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment