USED Gibson USA / Les Paul BFG MOD 2007 Trans Black [12]

Rugged and wildly cool! Les Paul BFG made in 2007 is now in stock!
The body top has been carved to express a tiger wood-like pattern, and the overall wild finish with ultra-thin matte lacquer paint has a strong impact on this model.
The front pickup is the original P-90, but the rear pickup has been replaced with a humbucker of unknown make and model number, and the direct-mount pickup has been changed to an escutcheon mount.
The pegs have been replaced, the control knobs have been changed from wooden knobs to black plastic speed knobs, the original 2 volume/1 tone/kill switch has been changed to 2 volume/2 tone, and only the front tone has been replaced with an orange drop capacitor.
The toggle switch plate on the back of the body and the control panel have been replaced with black parts instead of transparent parts that show the inside.
The strap pins have been replaced with Jim Dunlop locking pins, and strap side parts are included.
Although there are many modifications, it is very rare to find a used one in stock.

The fingerboard edge of the high fret on the 6th string side has been shaved, but this is not a problem as it is not normally used for playing.
There are large paint peels around the switch plate and control panel on the back of the body.
The finish is rough to begin with, but there are many scratches and dings from use scattered throughout the instrument.
Although there is a sense of use, each part has been maintained and cleaned at our repair center, and playability is good.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 019370665
Year of manufacture: 2007
Country of manufacture: USA
Case: Non-authentic soft case
Accessories: Strap lock
Weight: 3.30kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.5mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
019370665

Year of manufacture
2007

Country of manufacture
United States of America

Case
Non-genuine soft case

Accessories
Strap lock

Weight
3.30kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right

Fret remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
24.5mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment