USED Paul Reed Smith (PRS) / McCarty 594 Singlecut McCarty Tobacco Sunburst [12]

A PRS-style modern vintage guitar named after Ted McCarty, who was also involved in the development of Les Paul.
The McCarty 594 single-cut model is the result of Paul Reed Smith's deep knowledge of vintage guitars and the results of his research in every detail.
The scale is 24.594 inches, which is slightly shorter than the commonly recognized 24.75 inches, and the sound and playing comfort can be felt due to the unique tension.
The pegs are also equipped with the newly developed "Tweaked Phase III" pegs, which are designed to minimize string vibration loss in the tuners and transmit vibrations to the body as much as possible.
The neck shape is a "Pattern Vintage" shape, which is a detailed reproduction of the neck shape of Ted McCarty's 1953 Les Paul.
Newly developed 58/15LT (Low Turn) pickups are installed. The output is kept low to give a clear and warm tone with a pleasant, singing sound, and it is a vintage pickup in the PRS style, with a 58's humbucker in mind.
A coil tap is also provided, allowing each pickup to be played as a single coil.
The toggle switch is located on the 6th string side, instead of near the control as on conventional PRS pickups.
The length of the lead wire that runs through the body is also an important element of the vintage tone, and this is reflected in the thorough attention to detail.
This is an excellent model that overturns the image of PRS, which is characterized by its high-fidelity sound. This model is a must-try for Les Paul fans.

There are some scratches and dents, and the metal parts are a little dull, but there are few signs of use and it is in good condition.
It has been maintained and cleaned at our repair center and has good playability.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 18 258137
Year of manufacture: 2018
Country of manufacture: USA
Case: Original hard case
Includes: Wrench
Weight: 3.73kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.8mm
Neck thickness near 12th fret: 25.2mm
SCALE: 625mm (24.594")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
18 258137

Year of manufacture
2018

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Wrench

Weight
3.73kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
22.8mm

Neck thickness near 12th fret
25.2mm

Scale
625mm (24.594")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment