USED SCHECTER / AR-06 See Through Black [12]

This model is a Schecter-style adaptation of the JG model popular with modern rock bands.
It has an ash body and maple neck/fingerboard with 24 frets, which is only used on the see-through black version, and the Tune-O-Matic bridge/tailpiece allows for flexible down-tuning.
Pickups are Schecter's standard model MONSTER TONE on the front, and the rear has been replaced with a DiMaggio DP100 (SUPER DISTORTION).
Since this is a 2013 model, there is no toggle switch, and the three slide switches are front PU ON/OFF, rear PU ON/OFF, and rear PU coil tap from the neck side.

There are scorch marks on the head and peeling paint on the contour of the body back.
There are many scratches on both the top and back of the body, and the metal parts are dull.
There is rust on the pole piece of the front pickup, but it does not affect the use.
The front pickup polepiece is rusted, but it does not affect the playability of the instrument.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: AR130345
Year of manufacture: 2013
Country of Manufacture: Japan
Case: Non-authentic soft case
Weight: 3.93kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 22.3mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
AR130345

Year of manufacture
2013

Country of Manufacture
Japan

Case
Non-genuine soft case

Weight
3.93kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.7mm

Neck thickness near 12th fret
22.3mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment