USED GRECO / GO III 1300 1978 Natural Matte [12]

The culmination of the Greco GO series!
The GO series was introduced in 1978 as the original model, followed by the GO II series, and now the GO III series is completed.
The GO III 1300 has a 7-piece maple/walnut neck with ebony fingerboard, and a 3-layer arched maple/mahogany/flat maple body wing. The guitar is equipped with an SX-1 humbucker and a SX-2 humbucker.

The pickups feature an H-S-H layout with SX-1 humbuckers and PU-250 single coils, a 6-way rotary switch pickup selector, independent volume and tone controls for each pickup, and a master volume on the first string horn.
The rotary switches are Neck/Middle/Bridge/Neck+Middle/Middle+Bridge/Neck+Bridge, allowing for extremely versatile sound creation.

It is equipped with the original T.S. Vibrato bridge, which provides a unique arming effect.

This is a very rare used instrument, so please take advantage of this opportunity!
There are many scratches and dents scattered throughout the instrument, and it shows signs of use commensurate with its age.
The frets are low due to fret wear, but there are no problems with playing the instrument in its current condition.
The fretboard has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: I788767
Year of manufacture: 1978
Country of manufacture: Japan
Case: Non-authentic hard case
Accessories: Arm
Weight: 4.11kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
I788767

Year of manufacture
1978

Country of manufacture
Japan

Case
Non-genuine hard case

Accessories
Arm

Weight
4.11kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret remaining
Still good for cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment