USED Gibson / 1973 SG Special Walnut [12]

We have a 1973 SG Special in stock.
We have determined that it was made in 1973 by the serial number and the pot dates on the front and rear tones.
It is in full original condition including pegs, nut, frets and electrical parts.
It has early 1973 specs: mahogany body, 3-piece mahogany neck, rosewood fingerboard with dot inlays and binding.
It is equipped with two mini humbuckers and a wide travel bridge. Combined with the one-ply pickguard, it has an attractive retro look.
Overall, there are numerous scratches, dings, and paint peeling scattered throughout, giving it a feel commensurate with its age.
The frets are quite low, but we consider this acceptable as it does not interfere with playing, as this age is equipped with low and wide frets called "fretless wonder".
The playability is good, as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 052605
Year of manufacture: 1973
Country of manufacture: USA
Case: Original hard case
Weight: 3.10kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment (high frets)

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
052605

Year of manufacture
1973

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.10kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Still good for cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
41.2mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
24.0mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment (high frets)