USED Fender Japan / Stratocaster ST68-120SPL Vintage White [12]

We are pleased to announce the arrival of a 1968-spec Strat that was produced in small quantities as a Custom Edition!
The Custom Edition is the craft section of Fender that develops and produces special models that ideally fulfill the artist's dream, enhancing Fender's potential in every area, including the exploration of authentic materials, special coloring, high-precision, high-quality hardware, and the development of electronics.
This model is a very rare model that was only listed in some catalogs in 1993, and is reminiscent of the Strat used by the legendary southpaw guitarist "JH".

It features a large head with CBS logo without patent number and Schaller F-KEY machine head, a maple neck without skunk stripe due to a pasted maple fingerboard, and a 4-point neck joint plate with F engraving.

The alder body is equipped with USA-made ST-VINTAGE pickups and a steel tremolo block.

This is a rare model that rarely appears on the market, so don't miss this opportunity!

There is a large sticker mark on the underside of the bridge, and the paint around the spring cavity on the body back is peeling.
There are numerous scratches, dings, and paint chips scattered throughout, and there is severe paint reaction on the body end.
In addition to the overall paint burn and discoloration, the pickguard also shows discoloration due to age.
The back panel is missing, and although the guitar has been used quite a bit, it has been maintained and cleaned at our repair center, including nut replacement, and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MIJ L025162
Year of manufacture: 1991-1992
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.30kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 1.7mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.6mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, nut replacement

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
MIJ L025162

Year of manufacture
1991-1992

Country of manufacture
Japan

Case
non-genuine soft case

Accessories
Arm

Weight
3.30kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
1.7mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.6mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
23.0mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, nut replacement