USED Gibson Memphis / ES-335 Traditional Antique Faded Cherry [12]

ES-335 made by Memphis Factory is now in stock.
Memphis Factory, a factory under Custom Division (Custom Shop), was mainly responsible for manufacturing hollowbody models, and in 2013, as an independent division, they started working on vintage reissue models with a different approach and concept from Custom Division. ES-335 by Memphis Factory.
The 3-ply maple/poplar/maple body with a 22-fret Quarterson maple neck and rosewood fingerboard.
Rolled binding ensures smooth fingerings.
It features "milk bottle" Grover pegs, small block pearloid inlays, and a round C neck profile.
Two MHS Humbucker pickups, which were researched and developed by the Memphis factory, are mounted on the ES, and are specially designed for the ES to pick up even the most delicate body sounds.
Hand-wired with orange drop capacitors, the Memphis Tone Circuit Plus delivers a superb Gibson tone.
There are some minor scratches and dings scattered throughout, and the metal parts are tarnished.
The neck is a little wavy and high pitched, but this does not affect the playability of the guitar in its current state.
The neck is slightly wavy and has a high hang, but this does not affect the playability of the instrument.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 11238736
Year of manufacture: 2018
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate of Authenticity
Weight: 3.76kg
Truss Rod: Checked up to 60 degrees to both sides of the rod.
Fret Remaining: Still can be cut, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 24.3mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
11238736

Year of manufacture
2018

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Certificate of Authenticity

Weight
3.76kg

Truss Rod
No problem (Wave and high spring are present.)

Remaining frets
Still can withstand cutting, but the frets are low.

String height on the bass string side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
22.0mm

Neck thickness near 12th fret
24.3mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing