USED Gibson / SG-100 1971 Walnut [12]

We are pleased to announce the arrival of the SG-100, which was released between the latter half of 1971 and 1972.
It seems to have been released as a successor model of Melody Maker, but in the latter half of 1972, the following year, the model was changed and production was discontinued, which was a sad model.

It is equipped with one original single pickup on the front, which is a very manly spec, but the maple body and neck make it surprisingly bright and easy to use.

The production period of this guitar was short, and it is rarely seen in Japan.
This is one of those guitars that you can distort and strum like an alternative guitar.
Please give it a try.
This is an old guitar, so naturally there are scratches, dings, and weather checks.
Some of the scratches have been touched up.

The frets and nut are still original.
There are paint reaction marks on the back of the neck and body end, and strap pin fill marks on the cutaway on the 6th string side.
* There are also touch-up marks after the filling.

There are cracks on the plastic saddles of the 1st, 2nd, and 3rd strings, but there are no problems with their current use.
The bridge cover is missing and the hard case is also missing.

The guitar has been set up and ready to play after arrival.
Item Rank: B: Fairly scratched and used, but no problems with normal use.

Serial Number: 963559
Year of manufacture: 1971-1972
Country of manufacture: USA
Case: Soft case
Weight: 2.93kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.3mm
Neck thickness near 1st fret: 22.8mm
Neck thickness near 12th fret: 23.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
963559

Year of manufacture
1971-1972

Country of manufacture
U.S.A.

Case
Soft case

Weight
2.93kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
40.3mm

Neck thickness near 1st fret
22.8mm

Neck thickness near 12th fret
23.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair