USED Gibson USA / Les Paul Custom 1989y Ebony [12]

1989 Les Paul Custom is now in stock.
Maple top/mahogany back, mahogany neck, ebony fingerboard, royal style.
As the demand for HR/HM music increased, heavyweight bodies were adopted.
This particular guitar also weighs 4.59kg, but it has a solid bass output.

The pickups are "The Original HB-R/L" a.k.a. "foundation pickups" produced with the cooperation of Mr. Bill Lawrence.
The neck grip is a 60s style slim neck and boasts high playability.

It is reasonably old but in good condition.
It also comes with a Yamano Gakki warranty card (expired) from that time, which is a nice touch.

There is an ESP sticker on the hard case, which is a nostalgic sticker that came with strings sold in the 80s and 90s.

Please try it out.
Since this is an old instrument, there are scratches, dents, dull metal parts, and rust.
There are some weather checks on the head top, which is typical of this age, and on the entire body.
There are paint reaction marks on the end of the body, but they are not that noticeable.
The rear and front escutcheons are cracked, but there are no problems with use.

The body end has been set up after arrival and can be played with no worries.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 80829575
Year of manufacture: 1989
Country of manufacture: USA
Case: Original hard case
Weight: 4.59kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.6mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 24.3mm
SCALE: 624mm (24.56")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
80829575

Year of manufacture
1989

Country of manufacture
United States of America

Case
Genuine hard case

Weight
4.59kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.6mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
24.3mm

Scale
624mm (24.56")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair