Skip to product information
1 of 16

USED P-PROJECT / THE PUMPS BASS / PUM 4st Black [12]

Serial Number : 170544

[SN 170544] USED P-PROJECT / THE PUMPS BASS / PUM 4st Black [12]

Item Code: 12-2800003111769
Condition: USED
Store: [12] shinsaibashi

Regular price ¥104,000 JPY
Regular price Sale price ¥104,000 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
A bass with professional specs by a Japanese component maker.
P-PROJECT is a component/custom-made guitar/bass brand that was established in Kobe in the 1990s and produced models for prominent Japanese guitarists.
THE PUMPS BASS, the original model of P-PROJECT's basses, is now in stock.

The compact body with a long horn on the 6th string side and a deep cutaway on the 1st string side is made of swamp ash, with a maple neck and 24-fret ebony fingerboard with bolt-on joints.

The compact head design, 3:1 pegs, height-adjustable nut, and Schaller bridge with flexible string-to-string pitch adjustment are all pro specs designed for studio use and tuning.

The pickups are EMG PJs, and P-PROJECT's original preamp allows fine tuning on the back plate side in addition to the knob on the top of the body.

This is a high-spec bass that can be used in the studio, live performance, and recording, regardless of the scene.

There are some minor scratches and dents scattered throughout, and the metal parts are dull.
It has a slight feeling of use, but has been maintained and cleaned at our repair center, so playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 170544
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.74kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 22.4mm
SCALE: 864mm (34")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
170544

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.74kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
40.2mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
22.4mm

Scale
864mm (34")

RADIUS
356mm (14")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
国産コンポーネントメーカーによる、プロスペックを備えたベースです。
1990年代に神戸にて発足したコンポーネント/オーダーメイドのギター/ベースブランドで、著名な国内ギタリストのモデルも製作していたP-PROJECT。
そのP-PROJECTのベースのオリジナルモデルであるTHE PUMPS BASSが入荷しました。

6弦側の長く伸びたホーンと1弦側の深いカッタウェイが特徴的なコンパクトなボディにはスワンプ・アッシュが使用されており、メイプルネックに24フレットのエボニー指板をボルトオンジョイントしております。

コンパクトなデザインのヘッドに3:1に配されたペグ、高さ調整可能なナットの採用、弦間ピッチをフレキシブルに調整可能なシャーラー製ブリッジなど、スタジオでの使用や調整を想定したプロスペックとなっております。

ピックアップはEMGのPJを搭載しており、P-PROJECTオリジナルのプリアンプによりボディトップのツマミに加えて、バックプレート側でも微調整が行えます。

スタジオ、ライブ、レコーディングとシーンを選ばず活躍してくれるハイスペックなベースです。

全体的に細かい擦り傷や打痕が散在しており、金属パーツにくすみがございます。
やや使用感はございますが、弊社リペアセンターにて各部メンテナンス・クリーニング済みでプレイヤビリティは良好です。
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: 170544
製造国: 日本
ケース: 非純正ソフトケース
重量: 3.74kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.5mm
弦高高音弦側: 12フレット上 2.0mm
ナット幅: 40.2mm
ネック厚1フレット付近: 20.2mm
ネック厚12フレット付近: 22.4mm
スケール: 864mm (34")
RADIUS: 356mm (14")
セットアップ時の弦: D'Addario EXL165 / .045-.105 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
170544

製造国
日本

ケース
非純正ソフトケース

重量
3.74kg

トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし

フレット残り
問題なし充分なフレット高さあり

弦高低音弦側
12フレット上 2.5mm

弦高高音弦側
12フレット上 2.0mm

ナット幅
40.2mm

ネック厚1フレット付近
20.2mm

ネック厚12フレット付近
22.4mm

スケール
864mm (34")

RADIUS
356mm (14")

セットアップ時の弦
D'Addario EXL165 / .045-.105 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4