USED Fender / Japan Exclusive Hama Okamoto Precision Bass #4 [12]

Signature model of Hama Okamoto (OKAMOTO'S).
Basswood body with maple neck and rose fingerboard.
Although it is a Precision Bass, it has the slim neck shape of a Jazz Bass.
Equipped with Vintage-Style Split Single-Coil Precision Bass pickups.

There are some minor scuffs and dings on the body back, but it is in good condition with little signs of use and good playability.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: JD20016249
Year of manufacture: 2020
Country of manufacture: Japan
Case: Soft case

Weight: 3.87kg
Truss Rod: Note: Loose rod has been cut off, but the neck is currently in good condition.
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.6mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 25.0mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut groove correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD20016249

Year of manufacture
2020

Country of manufacture
Japan

Case
Soft case

Accessories

Weight
3.87kg

Truss Rod
Note: There is no problem with the neck as it is now due to the rod being loosened and cut off.

Remaining frets
There is a note that the frets are low, although they still stand up to cutting.

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.6mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
25.0mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut groove correction