USED Sadowsky Tokyo / RS Olympic White / Tortoise Shell Pickguard [12]

We are pleased to announce the arrival of a discontinued Japanese-made Sadowsky RS!
This is an ST type made in Sadowsky Tokyo, where Yoshiyuki Kikuchi of the current Three Dots Guitas used almost the same woods and parts as Sadowsky in New York, and built it in Japan with the same manufacturing process.

The ST type is a traditional spec with an alder body, maple neck, and rosewood fretboard, but boasts outstanding playability thanks to the gentle fretboard radius and highly accurate integration and adjustment.

Equipped with three highly responsive original pickups, this guitar produces a thick core sound with a strong presence whether you play chords or lead.

This is a Japanese-made Sadowsky that is virtually impossible to find new, so please take advantage of this opportunity!
There are many dents scattered on the tip of the head and neck grip, but they do not affect the playing.
The paint on the body has yellowed with age, and there are scratches on the back of the body under the cutaway on the first string side and on the lower part of the body.
There are also some minor scratches and dings, paint cracks on the neck joint, and metal parts are tarnished.
The neck joint has paint cracks, and metal parts are dull. Although there are signs of use, each part has been maintained and cleaned at our repair center, and playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 61425
Country of manufacture: Japan
Case: Original soft case
Accessories: Arm
Weight: 3.66kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.1mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.6mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
61425

Country of manufacture
Japan

Case
Genuine soft case

Accessories
Arm

Weight
3.66kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.1mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.6mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment