USED Gibson / 1965 SG Junior / Cherry Cherry [12]

Made in 1965. Narrow neck SG is now in stock.
Body and neck made of high quality mahogany.
The fingerboard is also made of high quality rosewood.

The guitar has been refretted and re-nutted, and playability is very good.

The pickups are black/black wire, 2-blade wiring, short magnet P-90s, and the pickup covers are "UC-450-1/2".
* One pickup screw has been replaced.

The pickguard has chips and cracks.
Also, the original brass shaft Kluson Deluxe is installed, but it is partially bent.
Currently, there are no problems with use at all.

The bridge is equipped with the original TPBR 8513, but one of the imo screws has been replaced.
Both the neck and body have been over-lacquered.

Please try the superb sound.
The guitar is old, so it will have some signs of use.
The guitar has been set up after arrival and can be played without any worries.
Please give it a try.
Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial Number: 502602
Year of manufacture: 1965
Country of manufacture: USA
Case: Non-authentic hard case
Weight: 2.71kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 1.8mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 39.5mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, all peg washers loosened, truss rod cover screw holes loosened, one cavity hole chipped

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
502602

Year of manufacture
1965

Country of manufacture
U.S.A.

Case
Non-authentic hard case

Weight
2.71kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
1.8mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
39.5mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
24.7mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, all peg washers loosened, truss rod cover screw holes loosened, one cavity hole chipped