USED YAMAHA / SF-5000 1981 Red Sunburst [12]

YAMAHA's original model SF with beautiful smooth curved surface is now in stock.
It has an ST-like alder body with rounded body edges, a back contour that fits the body, and an asymmetrical body with a deep cutaway on the first string side. The LP model features 2 humbuckers, a tune-o-matic bridge, a 3-way toggle switch, and a set neck joint.

It is compatible with a bi-sound system that can switch between humbucker and single coil by pushing/pulling the tone, allowing for a wide range of sounds.
Overall, there are some minor scratches and dings, but considering the year of manufacture, the appearance is in good condition with little signs of use.
The neck is slightly wavy, but since it is difficult to correct this with the truss rod, it has been set up with fret rubbing.
The neck has been maintained and cleaned, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: 026288
Year of manufacture: 1981
Country of manufacture: Japan
Case: Soft case
Weight: 3.34kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right (with some waviness).
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.4mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
026288

Year of manufacture
1981

Country of manufacture
Japan

Case
Soft case

Weight
3.34kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod (with waviness)

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.4mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing