USED Orville by Gibson / LPS / Les Paul Standard w/P-90 Antique Gold [12]

1954 spec Les Paul by Orville by Gibson is now in stock!
This Les Paul Standard by Orville by Gibson, a Gibson-approved brand manufactured and sold in Japan since around 1988, is equipped with two Gibson P-90 pickups and a wrap-around bridge, reproducing the specifications of around 1954.

The G at the beginning of the serial number means it is equipped with Gibson pickups, and the next number 1 indicates that it was made in 1991 and manufactured by Terada Gakki.
The number 1 indicates that it was made in 1991 by Terada Gakki, and the number 2 indicates that it was made in 1991 by Terada Gakki.

It is very rare to find this model even in used condition.
Please consider this opportunity!
There are many dents and paint chips scattered throughout, and there are large and small paint peels around the perimeter of the body top.
There are numerous buckle scratches on the body back, and the metal parts are dull.
The paint from the head back to the neck grip has lost its luster due to age, but there are no signs of paint correction.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
The pegs have been replaced, but currently have parts that are believed to be original.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: G106458
Year of manufacture: 1991
Country of manufacture: Japan
Case: Non-genuine Gibson gig case
Weight: 4.08kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 24.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
G106458

Year of manufacture
1991

Country of manufacture
Japan

Case
Non-genuine Gibson gig case

Weight
4.08kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.7mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
24.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment