USED Fender USA / Eric Clapton Stratocaster w/Lace Sensor Pickups MOD Gold(Refinish) [12]

Eric Clapton model refinished in gold leaf style is now in stock.
The body has been refinished based on the 2001 "BLACKIE" model.
The body was refinished in gold with a brown undercoat after the black paint was stripped off.

The pickups and circuitry have been kept in their original condition, with the three Race Sensor Gold pickups, TBX controls, and mid-boost circuitry still intact.
The refinished paint is peeling and the "BLACKIE" logo on the headtop has been removed.
There is some paint lift above the position marks and a ding on the fingerboard surface on the treble string side at the 3rd fret.
The paint on the fingerboard is shiny and there are many scratches, but they do not affect the playing.
There is a possibility that the guitar has been refretted/re-nutted as the paint around the frets has been scraped off.
The arm is missing and there are some signs of use, but the playability is good as each part has been maintained and cleaned at our repair center.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: SZ0179789
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Weight: 3.72kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 22.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
SZ0179789

Year of manufacture
2001

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.72kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
Still good for cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
21.6mm

Neck Thickness near 12th Fret
22.9mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment