USED Fender USA / American Vintage 52 Telecaster MOD 2001 Vintage Natural [12]

We have just received a 52 Telecaster from the American Vintage series, which is still very popular.
The serial number is unknown because the bridge has been replaced, but we have determined that it was made in 2001 based on the body date (2000) and neck date (2001).

The early 50's specs are faithfully reproduced with a center bookmatched ash body, 1-ply black guard, one-piece maple neck, spaghetti logo, and all screws are flathead screws.
This model is the origin of the Telecaster, which continues to this day.

The bridge/bridge saddle has been replaced with a genuine Fender 6-string type, allowing octave adjustment and string height adjustment for each string.
There are numerous scratches and dings scattered throughout, and there is a paint chip on the top edge of the body on the 6th string side.
There are numerous weather checks on the back of the head and body due to age, and the metal parts are dull.
The nut and bridge have been replaced, the truss rod has a little left in the tightening direction, and the frets are low due to fret wear, but each part has been maintained and cleaned at our repair center, and playability is good as is.
Item rank: B+: Some scratches, but no problem in normal use.

Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Weight: 3.50kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right (not much left)
Fret Remaining: Still can be cut, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 22.8mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Year of manufacture
2001

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.50kg

Truss Rod
No problem, rod is checked up to 60 degrees to the left and right (not much left)

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
22.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing