USED Gibson USA / Les Paul Standard Double Cutaway Plus 1998 Trans Amber [12]

The double cutaway makes this Les Paul easy to play even at high frets.
The wood specs include a AAA grade beautifully sculpted maple top, a contoured mahogany back for an easy fit, and a mahogany neck with rosewood fingerboard.

The thin neck shape and double cutaway, which dramatically increases playability in the high position, are the most distinctive features.

The chambered finish gives it a lightweight and slightly saturated sound, but the pickups have been replaced with the original 490R on the front and Seymour Duncan SH-4 (JB) on the rear to output a powerful and crisp rock sound.
There is some paint floating around the tip of the head top and around the head logo.
There are scratches on the back of the body, and there are also scratches and minor dings scattered throughout the body.
The instrument has been maintained and cleaned at our repair center, including the replacement of strap pins, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 92948486
Year of manufacture: 1998
Country of manufacture: USA
Case: Original hard case
Weight: 3.32kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, strap pin replacement

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
92948486

Year of manufacture
1998

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.32kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.3mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.6mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, strap pin replacement