USED Aria Pro II / PE-MAHO II/G Dark Brown(Open-Pore Finish) [12]

Low cost version of the original Aria Pro II model, PE.
Curved top mahogany body with rosewood fingerboard and mahogany neck with set neck joint.
The neck joint has a smooth heel-less finish like a through-neck, which provides stress-free playability even in the high position.

Equipped with two classic power "CPH-1G" pickups, this guitar has a well-balanced, clear tone with a warm sound.

The bridge has a wider octave adjustment range than a standard tune-o-matic bridge, and the tailpiece allows smooth string changes by simply hooking the ball end.
It is in good condition with only minor scuffs and scratches.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 1024041171
Case: Non-authentic soft case
Weight: 3.53kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 23.2mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
1024041171

Case
Non-genuine soft case

Weight
3.53kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
20.7mm

Neck thickness near 12th fret
23.2mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring