USED Fender / Jean-Ken Johnny Jaguar Candy Apple Red [12]

MAN WITH A MISSION guitarist and vocalist Jean-Ken Johnny's signature model, the Jean-Ken Johnny Jaguar, is now in stock!
Jean-Ken Johnny has been a fan of Jaguars throughout his career, which began in 2013 when he picked up a striking Candy Apple Red Pawn Shop Jaguarillo.
Since then, he has replaced the rear humbucker pickup with a Seymour Duncan TB4-ZB, installed a Buzz Stop to prevent string drop even with intense playing, a Hipshot GT-2C that can instantly switch the 6-string to Drop D, satin-finished neck back for playability The Jaguarillo of Jean-Ken Johnny has evolved over the years to keep up with the ever-evolving music of MAN WITH A MISSION.

In addition, for this modeling, new requests were added, such as installing a soap bar type pickup on the front and adopting a toggle switch for the pickup selector, and so on. This model is not just a reissue of the Jaguarillo.
The model is not just a reissue of the Jaguarillo, but a model worthy of the "Jean-Ken Johnny Jaguar" name.
In addition, the band logo sticker is included, without the signature, so that players other than fans can also use the model.
You can also enjoy putting it on the same place as the original.
It is in good condition with only minor scuffs and scratches.
It has been maintained and cleaned at our repair center and has good playability.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: JD24021591
Year of manufacture: 2024
Country of manufacture: Japan
Case: Original soft case
Accessories: Arm, band logo sticker
Weight: 3.78kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.0mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD24021591

Year of manufacture
2024

Country of manufacture
Japan

Case
Genuine soft case

Accessories
Arm, band logo sticker

Weight
3.78kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.0mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
23.0mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, deburring