USED K.Nyui CUSTOM GUITAR / KNTE Koa / Mahogany Natural [12]

From K.nyui Custom Guitars, a private brand developed by Kazuhiko Nyui, a master of Japanese high-end guitars, comes this used TL type guitar with koa wood body top.
The 2-piece center mahogany body is topped with Hawaiian koa.
The maple neck is carefully sanded to feel as if it is sucking in your hand, and the ebony fingerboard has 21 frets.

The 12" radius fingerboard has medium jumbo frets, and the solid construction, precision integration, ultra-thin satin finish, Lollar El Rayo pickup, Emerson Pro Pot, and paper-in-oil capacitor give it a full and warm sound. The sound is full and warm.
A mini-switch coil-tap function allows you to instantly switch to a crisp, TL-like sound.

The ultra-thin finish not only makes the most of the instrument's sound, but also allows the instrument to develop its own distinctive look as it is used more and more, with scratches, dents, and peeling paint.
There are paint chips scattered around the perimeter of the head top and numerous dents on the sides, back, and end of the body.
There are paint spots and fine scratches on the top of the body, and the metal parts are dull.
The guitar has been maintained and cleaned at our repair center and is in good playability condition.
Part of the attached semi-hard case is faded.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: #KN957
Year of manufacture: 2016-
Country of manufacture: Japan
Case: Genuine soft case
Accessories: Certificate, Spec Sheet, Wrench
Weight: 4.06kg
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem
Fret Depth: No problem, sufficient fret height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 23.8mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
KN957

Year of manufacture
2016- (2016)

Country of Manufacture
Japan

Case
Genuine soft case

Accessories
Certificate, spec sheet, wrench

Weight
4.06kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
23.8mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair