USED Orville / Les Paul Custom LPC-75 1991 Ebony [12]

Orville Les Paul Custom is now in stock!
This is an Orville LPC-75, which was distributed in Japan from the late 1980's to the late 1990's. The serial number indicates that it was made in 1991 and manufactured by Terada Gakki.

It has a maple top/mahogany back body, a set neck jointed mahogany neck, and a rosewood fingerboard instead of ebony as the original Gibson.

The pickups are Orville Originals made in Japan.
The slim neck is easy to grip and easy to play, and the careful craftsmanship that can only be achieved by Japanese manufacture makes this a reliable instrument.
The position of the strap pin on the neck side has been changed, but the screw is still embedded in the original hole.
There is a paint chip on the tip of the head and many buckle scratches on the body back.
There are also numerous scratches and dings, both large and small, scattered throughout the instrument, and metal parts are tarnished.
The neck is slightly wavy, so it has been fretted over, and there are a few frets left.
The truss rod cover and nut have been replaced, and there is a general feeling of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: K017368
Year of manufacture: 1991
Country of Manufacture: Japan
Case: Non-authentic gig case
Weight: 4.19kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Remaining: Need to consider replacing the frets next time it is repaired.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.7mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
K017368

Year of manufacture
1991

Country of manufacture
Japan

Case
Non-genuine gig case

Weight
4.19kg

Truss Rod
No problem (slight waviness)

Fret remainder
Need to consider replacing the frets next time when repairing.

String height on bass string side
2.0mm above 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.7mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair