USED Fender USA / Eric Clapton Stratocaster w/Lace Sensor Pickups 1988 Pewter [12]

Eric Clapton's signature model, made in 1988 and still popular today, equipped with the Race Sensor.
This model is based on the "BLACKIE", which was his main guitar for many years. It is a low-noise pickup that does not lose the high frequencies characteristic of single pickups, and is easy to nuance.

The mid control, which boosts the middle by 25db, gives a powerful humbucking-like sound with a single Stratocaster.
There is a hole in the pickguard where a guitar-synth pickup might have been installed, and there are many scratches and surface deformation around the hole, as well as a crack next to the pickguard screw hole.
There are also many scratches and dents scattered throughout the guitar, and the metal parts are tarnished.
The topcoat is burnished and the pickguard is distorted due to age.
The neck is off-center, which is not a problem for normal playing, but please note that the strings may drop depending on your playing style.
The jack has been replaced, but the pots are judged to be original from the date.
The pots have been replaced, but the pots are judged to be original based on the date.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: SE800215
Year of manufacture: 1988
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 3.41kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.0mm
SCALE: 628mm (24.75")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, strap pin x 2 screw holes looseness correction

* The truss rod, fretboard rest, and string height are measured by our staff at the time of setup and may change due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
SE800215

Year of manufacture
1988

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm

Weight
3.41kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.0mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, strap pin x 2 screw holes looseness correction