USED Bossa / OB-4 [12]

Bossa OB-4 made in Japan is now in stock.
This model represents the Bossa basses, which were used by musicians in Japan and abroad as one of the Kansai's leading guitar/bass brands.

The OB-4 features player-friendly specs such as a compact body and head with excellent handling and design, a narrow nut width like a JB, and a neck grip with rounded shaping that makes it easy to grip.

The wooden pickup covers provide an excellent feel when you place your thumb on them.

A master volume, pickup balancer, and 3-band EQ allow for a wide range of sound creation.
There are two large paint peels on the neck grip, and some parts are darkened.
The body also has numerous scratches and dings scattered throughout, and metal parts are tarnished.
Some of the protective film on the beck panel has peeled off.
The neck is a little wavy, and the truss rod has little room to tighten, but there is no sound jamming or fretting.
The strap pin has been replaced with a Schaller locking pin, but the strap side part is missing.
The balancer knob has been replaced with a non-genuine cap.
Although the instrument has some signs of use, it has been maintained and cleaned at our repair center and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 960919
Country of manufacture: Japan
Case: Soft case
Weight: 3.65kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right (a little wavy, not much left)
Fret Height: No problem, fret height is high enough.
String height on bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 37.5mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.6mm
SCALE: 864mm (34")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
960919

Country of manufacture
Japan

Case
Soft case

Weight
3.65kg

Truss Rod
No problem (slight waviness and little remaining)

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
37.5mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.6mm

Scale
864mm (34")

RADIUS
356mm (14")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing