USED Fender USA / American Vintage 57 Stratocaster MOD 1995 Black [12]

This 57 Stratocaster from the American Vintage series retains the taste of the good old days, but is built with the latest technology in machining precision.
The serial number and pot dates on the front and center tones indicate that it was made in 1998 (the volume pot is also original but illegible due to solder).

Alder body and one-piece maple neck with 7.25R radius fingerboard.

The pickups have been replaced: Duncan APS-1 on the front, Duncan SSL-1 on the center, and the rear pickup is not labeled, but it seems to be Duncan from the bobbin and lead wires.

This is a 57 Strat, which many people think of along with the 60's style as the Strat type of yesteryear.
There are two large dents with paint chips on the body end and a crack on a part of the back panel.
The back of the body is dotted with scratches and large and small dings, and there are paint chips on the top of the head and around the perimeter of the back.
The paint on the neck has turned a dark candy color with age, and there are scratches and dings scattered throughout.
The neck has been refretted and re-nutted, and although there are some signs of use, the guitar has been maintained and cleaned at our repair center, including the replacement of strap pins and a set of control knobs, so it is in good playability condition.
The original hard case is missing, and a recent Fender gig bag is included.
Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: V082232
Country of manufacture: USA
Case: Gig Case
Accessories: Arm
Weight: 3.68kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number V082232

Country of manufacture: U.S.A.

CaseGig Case

AccessoriesArm

Weight3.68kg

No truss rod problemNo truss rod problem.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.8mm

Neck thickness near 1st fret 20.5mm

Neck thickness 22.5mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment