USED Fender / Vintera 70s Telecaster Deluxe Vintage Blonde [12]

This model is a reproduction of the Telecaster Deluxe from the 1970s.
It has an alder body with back contour, a "Thin C" shaped maple neck, and a 9.5 radius maple fingerboard with 21 medium jumbo frets.

The pickups are original wide-range humbuckers with high stucco power, but with low noise and a crisp Fender-like sound.

The model reproduces the specifications of the 70's with a large head, bullet nut, one-piece maple neck, wide-range humbucker pickups with Fender logo engraving, four witch hat control knobs, and a pickup selector with 3-way toggle switch located on the 6th string side. The model is a reproduction of the specifications of the 70's.
There are some minor scratches and dings scattered throughout, and the metal parts are tarnished.
The overall appearance is slightly used, but the playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: MX21116323
Year of manufacture: 2021
Country of manufacture: Mexico
Case: Original soft case
Weight: 3.58kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 1.8mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 23.4mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
MX21116323

Year of manufacture
2021

Country of manufacture
Mexico

Case
Genuine soft case

Weight
3.58kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
1.8mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
23.4mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment