USED YAMAHA / SG1000 1980 Brown Sunburst [12]

The SG1000 is the core model of YAMAHA's iconic solid guitar, the SG.
SG1000, which boasts high popularity among guitarists in Japan and abroad, is in stock and is determined to have been made in 1980 based on the serial number.

Double-cut body with heavy maple top/mahogany back, 3-piece maple/mahogany neck and ebony fingerboard with 22 frets.

It is equipped with original humbuckers compatible with the bi-sound system driven by push/push of the tone, and features a wide range of sound variations from fat and powerful to clear and taut tones with a high degree of practicality.
The paint is generally cloudy, and there are numerous scratches and dents of various sizes scattered throughout the instrument.
The neck is slightly wavy and twisted, so it has been set up with fret rubbing and slightly higher string height so that it does not interfere with playing.
There is a paint crack at the seam on the back of the body, but it does not affect the wood.
Although the instrument has a strong sense of use, it has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: 017258
Year of manufacture: 1980
Country of manufacture: Japan
Case: Hard Case
Weight: 4.41kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.2mm above 12th fret
String height on treble string side: 1.7mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 25.0mm
SCALE: 628mm (24.75")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, binding removal from both cutaways

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the instrument. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 017258

Year of manufacture1980

Country of manufacture Japan

CaseHard case

Weight 4.41kg

No truss rod problem.

No fret remainder problem, enough fret height

String height: 2.2mm above the 12th fret on the bass string side

String height 1.7mm above the 12th fret on the treble string side

Nut width 42.5mm

Neck thickness near 1st fret 20.5mm

Neck thickness 25.0mm near 12th fret

Scale 628mm (24.75")

RADIUS356mm (14")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, both cutaway bindings peeling correction