USED Nineteen Ninetyseven / CG112 Jewel Green [12]

An electric guitar with built-in active circuitry released by electronics manufacturer AKAI in 1997.
This electric guitar was produced by AKAI, which is well known in the musical instrument industry for its MPC series of samplers and EWI wind synthesizer.
The brand name comes from the year of its release, 1997.

Light ash body with maple neck/ Ebony fingerboard with 24 frets (1st and 2nd strings only).
Equipped with original NNS-SI/NNS-SII/NNS-HI pickups, 1 volume/2 tone/5-way lever switch, and active/passive switch.

GOTOH locking pegs and Wilkinson VG100G bridge provide smooth arming and stable tuning.

The control knobs are designed as an audio device, which is also interesting, as the manufacturer also produced audio equipment.
There are paint chips on the tip of the head and the bridge stud on the 6th string side.
There are some minor scratches and dents scattered throughout, and the hardware is dull.
Although the guitar is slightly used, it has been maintained and cleaned at our repair center, and is in good playability condition.
The arm is included, but it is a chrome plated one.
Item Rank: B+: Some scratches, but no problem in normal use.

Country of manufacture: Japan
Case: Non-genuine soft case
Accessories: chrome-plated arms
Weight: 3.22kg
Truss Rod: No problem, rod checked up to 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment.

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
Arm (chrome plated)

Weight
3.22kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.2mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise and tenon adjustment