USED Ibanez / The Artist Series 2630 1979 Antique Violin [12]

Japan Vintage Ibanez 2630 1979 is in stock!
This is an early model of the Artist Hollowbody series, which was manufactured for only two years from 1977 to 1979.

Curly maple body (top and back) with one-piece maple neck and ebony fingerboard with 22 frets.

Gorgeous decorations such as multi-binding from head to neck side and body, head inlays, and pearl/avalon split block inlays are also attractive.

Velve Tune pegs, bone/brass half and half nut, Gibraltar bridge/tailpiece, and other practical, original, and unique parts are used.

The pickups are equipped with Ibanez's original SUPER 80 with Flying Finger engraved on the cover, which produces a bright and punchy tone.
A tri-sound switch, which is effective only for the front pickup, is equipped, allowing for a wide variety of sound creation.
As is common with Ibanez models of this era, there are many cracks, discoloration, and peeling due to age-related deterioration of the binding.
In particular, the body binding is noticeably peeling and may catch on clothing or skin when playing, but for the sake of originality, we have left it as is.
The paint is peeling at the tip of the head, and the gear cover of the 6th string peg is missing.
There are many scratches and dings scattered throughout the guitar, and the hardware is dull and the chrome is peeling.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: C794325
Year of manufacture: 1979
Country of manufacture: Japan
Case: Non-authentic hard case
Weight: 3.91kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.8mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 23.8mm
SCALE: 628mm (24.75")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
C794325

Year of manufacture
1979

Country of manufacture
Japan

Case
Non-genuine hard case

Weight
3.91kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.8mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
23.8mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment