USED MOSRITE / Avengers LP Type Sunburst [12]

Rare Mosrite LP type is now in stock.
It has a slightly smaller and thinner single-cut body with a slightly arched body top.

It has 2 humbuckers and a tune-o-matic bridge/tailpiece specification, but the bridge is unique in that it uses a tailpiece bridge with a saddle for string length compensation.

The hollowbody makes this model lightweight and has a somewhat chipper tone, but it has a unique sound character with a crisp and clear sound.
There are some minor scratches and dents scattered throughout, and the hardware is dull.
The neck is slightly twisted and wavy, and the frets are quite low.
Item rank: B+: Some scratches, but no problem in normal use.

Country of manufacture: Japan
Case: Non-authentic hard case
Weight: 2.81kg
Truss Rod: No problem, rod is bent to 60 degrees left and right.
Fret Remaining: Still can withstand cutting, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.7mm
SCALE: 624mm (24.56")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problems in normal use

Country of manufacture Japan

CaseNon-genuine hard case

Weight 2.81kg

Truss rod rod has been checked up to 60 degrees left and right, no problem (slightly twisted)

Fret remainder can still withstand cutting, but the frets are low.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 41.3mm

Neck thickness near the 1st fret 20.3mm

Neck thickness near 12th fret 22.7mm

SCALE624mm (24.56")

RADIUS 241mm (9.5")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair