USED EDWARDS / MR-85 Kirk Hammett Black [12]

Edwards' Kirk Hammett model is now in stock.
This Edwards version of the Metallica Kirk Hammett model has a reverse head and impressive skull and bone inlays on the fingerboard.

The bridge is not FROYD ROSE ORIGINAL but TAKEUCHI TRS-101.

Front pickup is original, but rear pickup has been replaced with EMG FH-1.
There are many scratches and dents scattered throughout, and the hardware is dull.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 16515
Year of manufacture: 1990-
Case: Non-authentic soft case
Included: Arm
Weight: 3.85kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 19.7mm
Neck thickness near 12th fret: 20.7mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, burr removal, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
16515

Year of manufacture
1990- (the year of manufacture)

Case
non-genuine soft case

Accessories
Arm

Weight
3.85kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
19.7mm

Neck thickness near 12th fret
20.7mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, burr removal, electrical repair